Skip to main content
All CollectionsMonitor Connections
Connecting Mindray BeneVision N1 to Xchart
Connecting Mindray BeneVision N1 to Xchart

Required settings and video

Henrik Joreteg avatar
Written by Henrik Joreteg
Updated over a week ago

If you prefer a video walkthrough see below:

Step #1: Make sure you have the required equipment

In order to connect the BeneVision N1, you'll need:

  1. The cradle from Mindray that includes the required ports. Specifically it has the Ethernet and USB ports we'll need.

  2. The special adapter from Xchart. You can contact [email protected] to get these.

  3. Make sure it is physically connected as follows:

Step #2: Configure the monitor

Navigate to the following screen:

  1. Menu

  2. Maintenance

  3. Enter password (must be uppercase): MIN888

  4. Scroll over to the "Network Setup" tab by hitting the ">>" icon near the top right corner.

  5. On the network tab, in the menu on the left, select "HL7 Configuration" and change the following settings:

    1. Server Address: 192.168.0.7

    2. Port: 5000

    3. Data Interval: 10 Seconds (or 1 second, if available)

    4. Send Data: Toggle "ON"

    5. Send Waveforms: Toggle "ON" (if you are going to use this feature)


โ€‹

Did this answer your question?