Skip to main content
All CollectionsMonitor Connections
How to configure Mindray uMEC 12 for Xchart with Xlink adapter
How to configure Mindray uMEC 12 for Xchart with Xlink adapter

Also covers Mindray uMEC10, Mindray uMEC12, Mindray uMEC15

Henrik Joreteg avatar
Written by Henrik Joreteg
Updated over 7 months ago

Video Walkthrough (step-by-step written instructions also available below):
​

The relevant settings can be set as follows:

  1. Main Menu

  2. Maintenance

  3. User Maintenance

  4. password is: 888888

  5. Network Setup

    1. Confirm that "Select CMS" is set to "Off"

  6. Monitor Network Setup

    1. Address Type: "Manual"

    2. IP Address: 192.168.0.201

    3. Subnet Mask: 255.255.255.0

    4. Gateway: 192.168.0.1

    5. Click "Ok" to apply settings

  7. Restart the monitor to make sure settings are applied.

The "Monitor Network Setup" screen should look like this:
​


​
​

Did this answer your question?